Questions answered
What actually drives the cost of rewinding an electric motor, when replacement wins instead, and free quotes from rewind workshops.
Straight answers
How much does it cost to rewind an electric motor?
Mainly kilowatt rating and frame size, because copper content and winding hours scale with the machine. Then core condition, insulation class, any mechanical repair found at strip-down, hazardous-area certification and how fast you need it back. Most workshops quote only after stripping and testing. We publish the cost drivers, not a price per kW, because one figure would mislead.
What does AC motor rewinding cost, and what does a stator rewind cost?
No UK rewind workshop we read in October 2026 published a price: a stator rewind cost or AC motor rewinding cost comes from a quote after strip-down and testing. BEP lists new: TEC 5.5kW 2-pole IE3 £405.24, 11kW 6-pole IE3 cast iron £732.90 (read 12 October 2026). For a standard motor, a rewind well above list usually means replace.
How do I find a motor rewinding service?
Motor rewinders are specialist workshops, often listed as rewind and repair shops for AC, DC, high-voltage or hazardous-area machines. Send the nameplate details, the fault and your deadline. Ask whether the quote includes core loss testing, bearings and a test report. Our quote form sends those details to workshops that take the work, so you compare like with like.
Should I rewind or replace a failed motor?
Check the core, then compare the rewind quote with the nearest new equivalent's price and lead time. Small standard motors with an in-stock replacement usually favour buying new. Large, non-standard, high-voltage, DC or hazardous-area machines usually favour rewinding, often because the replacement is weeks or months away. A damaged stator core generally means replace.
Does rewinding a motor make it less efficient?
It can, if done poorly. The main mechanism is heat: burning off the old winding too hot degrades the insulation between the core laminations, raising losses permanently. A workshop controlling burn-off temperature and loss-testing the core before and after removal guards against exactly that. We will not quote a percentage: it depends on how the work is done.
What information does a rewind workshop need from me?
The nameplate data (kW, voltage, frequency, poles or speed, frame size, mounting, insulation class, enclosure rating, duty). What failed and what the plant was doing at the time. Whether it is inverter fed, how often it starts, any hazardous area certification, and how quickly you need it back. A photograph of the nameplate covers most of it.
How many times can a motor be rewound?
There is no fixed number. The limiting factor is the condition of the stator core, not the count of previous rewinds, because each removal of an old winding is a chance to damage it. Core loss testing before and after stripping is what tells you whether this motor is still worth rewinding.
Can a hazardous area motor be rewound?
Yes, but only by a workshop holding the right approval for repairing certified equipment, and with documentation that preserves the motor's certified status. This is a narrower market than general rewinds and it prices differently. Ask to see the workshop's certification scope before sending the machine, not afterwards.